전체상품목록 바로가기

본문 바로가기

현재 위치
  1. 홈
  2. 5.앰프

[P00000MH] YORKVILLE AP-2020

(해외배송 가능상품)
공급사 바로가기
YORKVILLE AP-2020
이전상품 다음 제품 보기 확대보기
기본 정보
상품명 YORKVILLE AP-2020
판매가 3,000,000원
상품코드 P00000MH
수량 수량증가수량감소

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션
옵션 선택

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

사이즈 가이드

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
YORKVILLE AP-2020 수량증가 수량감소 3000000 (  0)
총 상품금액(수량) : 0 (0개)

할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
바로구매하기예약주문 장바구니 담기 SOLD OUT 관심상품등록

이벤트

상품상세정보


제품설명



AP Series



AP2020 - Amplifier - 2x 600w @ 2 or 4 Ohms


The AP2020 weighs a comfortable but solid 35 pounds_comma_ fits into two rack spaces_comma_ and has the best distortion and noise specifications you will find anywhere. Unique 2 or 4 Ohm optimum load operation gives the AP2020 amp flexible output power as required. A simple user definable configuration allows it to deliver 600 Watts per channel continuous average into either 2 or 4 Ohms.











































































































































Amplifier class


H


Continuous Average Power @ 8 Ohms BCD (Watts)


250 (x2) / 400 (x2)*


Continuous Average Power @ 4 Ohms BCD (Watts)


450 (x2) / 600 (x2)*


Continuous Average Power @ 2 Ohms BCD (Watts)


600 (x2) / NA*


Continuous Average Power Bridged BCD (Watts)


1200 @ 4/8 Ohms


Burst Average Power @ 8 Ohms BCD (Watts)


350 (x2) / 450 (x2)*


Burst Average Power @ 4 Ohms BCD (Watts)


650 (x2) / 800 (x2)*


Burst Average Power @ 2 Ohms BCD (Watts)


1325 (x2) / NA*


Burst Average Power Bridged BCD (Watts)


2100@4Ohms / 1600@8Ohms


Frequency Response (Hz_comma_ +/- 1dB)


20-20_comma_000


Hum and Noise (un / Aweighted -dB)


0.971698113


THD -1kHz- 4 OHMS


less than 0.01%


THD - 20Hz-20kHz_comma_ 4 Ohms


less than 0.1%


Slew Rate (V/uS)


22


Slew Rate Bridged (V/uS)


44


Damping Factor (30 Hz - 400 Hz @ 8 Ohms)


450


Crosstalk (1kHz / 20Hz-20kHz)


-75 / -60 dB


Input Impedance - Bal/Unbal (Ohms)


20_comma_000/10_comma_000


Input Sensitivity (Vrms) For Full Power Out


1.0/1.4 V *


Max Voltage Gain (dB)


31


CMRR @ 60Hz (min/typ)


48/56 dB


Stereo / Mono / Bridge (S/M/B)


S/M/B


Protection


DC_comma_Load_comma_Thermal


Limiter


Peak


High Pass Filter


40Hz_comma_ 12dB Octave


Cooling


Internal Fan


Cooling Path


Front to Rear


Fan Filter


User Serviceable


Inputs - XLR


2


Inputs - 1/4 Jacks


2


Outputs - Speakon 4-pin


2


Outputs - Binding Post


2


Power Consumption (typ/max)


700/1440 Watts


Rack Spaces


2


Transformer Type


Toroidal


Exterior Finish


Baked_comma_ Black Painted


Other Features


* Max power into 2 Ohms / Max power into 4 Ohms


Dimensions (DWH /D fm ears_comma_ inches)


19 x 17.3 x 3.5 x 16.2


Dimensions (DWH /D fm ears_comma_ cm)


48.3 x 43.9 x 8.9 x 41


Weight (lbs / kg)


34 / 15.4


*


Specifications subject to change without notice











AP Series Overview


AudioPro Power Amplifiers src=

AudioPro AP-Series power amplifiers are built to withstand heavy-duty live sound reinforcement_comma_ touring systems or installation. They are the culmination of Yorkvilleĺs forty years of design and manufacturing experience for the music industry_comma_ and include features most in demand by audio professionals. They are the ideal choice when high headroom and low distortion are needed_comma_ especially when reproducing the dynamic range and clarity of todayĺs digital recordings.

Yorkvilleĺs AudioPro AP-Series power amplifiers are designed for rock solid performance right down to and below their lowest impedance ratings. An Ĺimpedance awareĺ design strategy deals with the realities of driving typical reactive speaker loads and they address the associated problems such as thermal shutdown_comma_ inductive snap-back_comma_ and premature current limiting. They will easily drive reactive phase shifted loads with no difficulty - even though they are still fully protected from accidental short circuits.

AudioPro amplifiers feature advanced protection schemes including DC current_comma_ load_comma_ thermal and breaker protection as well as a user-defeatable peak limiter that is transparent below clipping levels. A Ĺsoft turn-onĺ circuit eliminates damage to attached components and prevents nuisance breaker-tripping. The computer-optimized (Silentfan) front-to-back heat dissipation system incorporates ultra-quiet_comma_ variable-speed internal fans and are designed to ensure that excessive thermal stress will not occur. For ease of maintenance and to ensure efficient cooling_comma_ the amplifiers are supplied with long-life_comma_ faceplate-mounted_comma_ user serviceable_comma_ air intake filters. Front panel Power_comma_ Protect_comma_ Activity and Clip LEDs are bright and easy to see and all knobs and handles are recessed for safe_comma_ easy transportation.

The internal signal path has been optimized and a toroidal transformer is used ľ both of which serve to reduce hum and noise while keeping weight to a minimum. The two-tier power conversion of the AudioPro AP-Series amplifiers approaches efficiency levels normally associated with switching power supply technology; yet provide the superior transient response and low distortion of the best analog designs.

Inside an AP4020 src= AudioPro amplifier designs_comma_ while unique_comma_ are conservative with regard to the power handling capabilities of the output devices. To further assure trouble-free operation_comma_ all AudioPro amplifiers undergo a thorough computer-monitored_comma_ temperature-cycled_comma_ burn-in period to test for any deviation from design parameters.

The back panel features Speakon and binding post outputs as well as balanced XLR & ╝ TRS inputs. The peak limiter_comma_ subsonic filter_comma_ mono/stereo/bridge mode and ground lift switches are also mounted on the back panel. The unique Yorkville Impedance Mode switch (AP1020 & AP2020)_comma_ also located on the back panel_comma_ allows the user to select full output power into two or four ohms for maximum application flexibility.

Sturdy all-steel construction with a baked-on_comma_ black finish is used throughout and_comma_ for ease of integration_comma_ the amplifiers feature reinforced mounting ears and a compact two or three rack-space design.

All AudioPro amps come with Yorkvilles standard two-year (even if you break it!) transferable warranty (valid in USA and Canada only).

The Limiter Switch

All AudioPro power amplifiers have a user defeatable limiter circuit switch located on the back panel_comma_ next to the input jacks. That limiter is there to protect high frequency loudspeaker components that could be damaged by even small amounts of clipping when an amplifier is being driven close to its maximum output into a full-range cabinet.

When driving subwoofers at the maximum rated output power of the amplifier however_comma_ allowing a small amount of clipping at the output of the amplifier is considered an excellent trade-off to get a potential 2dB or 3dB increase in volume_comma_ and a small amount of clipping will not damage low frequency drivers. Defeating that limiter allows AudioPro amplifiers to run closer to clipping_comma_ and increases the audible volume by potentially as much as 3dB.

Competitive amplifiers without user defeatable limiting either_comma_ A) Set their limiting too high to actually offer any practical real-world high frequency component protection_comma_ or B) Set their limiting so low that they limit the amplifierĺs overall potential headroom.

When comparing

상품결제정보

배송정보

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 4,000원
  • 배송 기간 : 1일 ~ 3일
  • 배송 안내 :

교환 및 반품정보

서비스문의

상품사용후기

상품의 사용후기를 적어주세요.

게시물이 없습니다

상품문의하기 모두 보기

상품 Q&A

상품에 대해 궁금한 점을 해결해 드립니다.

게시물이 없습니다

상품문의하기 모두 보기

이전 제품

다음 제품